Printers using eco solvent inks should pay attention to the point.

author: Uvink

2022-11-21

Printers using eco solvent inks should pay attention to the point.Due to

some characteristics of eco solvent ink itself, special care should be taken in

the selection of continuous supply. When some friends use eco solvent ink,

the external ink cartridge leaks, and the elbow connecting the ink pipeline

is blocked, which finally leads to the disconnection of the printing head.

Therefore, you must pay attention to this if you want to match the corrosion

resistant continuous supply or ink cartridge, especially for desktop printers.

If the equipment is not used for a long time, pay attention to the cleaning of

the nozzle to avoid the blockage of the nozzle caused by the volatilization

and solidification of residual ink.

Printers using eco solvent inks should pay attention to the point.eco solvent ink

can be used for coating free printing on some materials, or it can be used for coating

free printing by means of printer heating. However, for some smooth surfaces,

ink alone is powerless, and the ink will accumulate together and cannot be

imaged clearly. Then special coating liquid must be used together, and the

three advantages of coating must be adopted.

Printers using eco solvent inks should pay attention to the point.The printing

quality should not be directly printed on some materials with coating, mainly on

smooth materials that do not absorb water. The effect is poor, but the effect after

coating is extraordinary. Abrasion resistance and waterproof Because the coating

ingredients contain the adhesive, the ink and material have very close adsorption

after printing, which is much more than the abrasion resistance of the uncoated state.

The drying speed is fast. The coating is prepared with special chemical materials and

used with eco solvent ink. It can be dried within one minute after printing,

especially on smooth materials such as glass.