What does the printing problem have to do with the printer?

   It may be that there is a problem with the ink supply, check whether the uv ink

itself is expired, condensed, or there is a problem with the quality, which will cause

the nozzle of the UV flatbed printer to not produce ink. If these phenomena occur,

you can replace them with new ones. Special Note: It is best to use the ink provided by

the original printer manufacturer to prevent the ink from not matching the print head.

   It may be that the print head is damaged. Due to improper use, the print head is burnt out.

You only need to replace the new print head; if the print head board is faulty, you can

contact the original UV flatbed printer manufacturer to replace the new print head board.

   It may be that the ink path and the nozzle are blocked. If the ink path and the nozzle are

seriously blocked due to the failure to clean the nozzle in time during daily operation,

it needs to be cleaned with a special cleaning solution. According to the beaded lines

sprayed from the nozzle of the UV flatbed printer, it can be judged that the clogging

problem has been solved. For the ink tube, it is recommended to replace

it in time according to the usage.

   It may be that the print head board is faulty. A fault in the print head board will cause

the uv flat print head to fail to discharge ink. In this case, contact the manufacturer to replace

a new board. It may be that the nozzle communication is missing or the network cable is loose.

Check whether the flat cable of the UV flatbed printer nozzle and the position of the interface

are loose or broken. If there is any damage, replace it with a new one.