How to quickly remove the smell produced by solvent ink printing?

author: Uvink

2022-12-12

How to quickly remove the smell produced by solvent ink printing？When using solvent

based ink to print, it takes a certain time for the solvent in the ink to escape in a process

called "degassing" after printing. Of course, if you want to eliminate the backlog of printouts

as soon as possible, so that you can continue to work in the next stage and maintain the growth

of profits, what is the best way? Many printing professionals hang their prints on shelves, on tables,

or even on clotheslines through the printing room. This option works well, but if your

space is limited, it is best not to fill it with dry print paper.

How to quickly remove the smell produced by solvent ink printing？This is where you can really

use the dryer. This is just a large box in which you can store loose rolls of print paper to avoid

overstocking. When using the dryer, keep the print paper as loose as possible and try to leave space

between the rolls - this allows air to flow through the entire print area and speeds up the degassing

process. The gases released are heavier than air, so they fall to the floor. Therefore, the bottom of

the box needs to have holes, or you can add some form of grid at the bottom. You also need to

keep the equipment a few inches from the ground to allow the gas to escape. If you also want to

improve efficiency, you can also add an air extraction fan at the bottom of the oven, or add

a blower at the top, which will increase the air flow and dry the print faster.